TLM2-Triple Light Mount/Light Bar
Click To Enlarge

Allows you to mount many different light configurations including a 7/16" or 3/8" bottom mount custom, Harley or chopper headlight, with running lights and/or turn signals on most metric bikes. (Lights not included).

See pictures below for several suggested uses and configurations.

Mounting holes are for 1/4" or 6mm bolts. (not included)


TLM2 Fits

  • Honda VTX1800 all models
  • Honda VTX1300 all models except S and R
  • Kawasaki VN1500 VN1600 Vulcan Mean Streak 
  • Kawasaki VN900 Vulcan 900 Classic 
  • 98 Honda Shadow Spirit 1100 VT1100/VT1100C
  • Some Honda Shadow Spirit 750
  • Honda Valkyrie GL1500C
  • Yamaha Dragstar 650
  • or other bikes within the measurement range below

If your bike is not on the above list, use these measurements and the Fitment picture to determine if the TLM1 fits your motorcycle...

  • A must be 3" to 5.9" between centers AND
  • B must be more than 6.75" AND
  • D must be less than .7"


The headlight hole is 1.3" forward from the mounting slots.

On the underside of the TLM2 there are 2 holes drilled and counterbored that do not go all the way through.  These are for a stock VTX headlight or any other 2 bolt headlight with mounting bolts about 3.93" or 100mm center to center.  All you have to do is drill the holes the rest of the way through to use them.

Mount, by sliding the head of a 6mm bolt into each side of the slots at the back.  You can adjust the width of the mounting holes from 3" to 5.9" on center while keeping a clean look on the top.


Stock VTX 1800C (top)


TLM2 - With spotlights installed on a VTX 1800C with stock light


NOTE: If you would like help determining fit, email the following information... measurements A, B, C and D from the fitment picture above AND YEAR, MAKE, MODEL and SIZE.

  • Manufacturer: Refined Cycle
  • Manufacturer's Product Number: TLM2

TLM2-Triple Light Mount/Light Bar

Price: $69.99
* Marked fields are required.
Qty: *