FM14-Front Fire Extinguisher Mount for Toyota 4Runner 96-02

• Does not require any drilling, mounts to existing front seat bolt locations
• Can be used on EITHER SIDE of front seat area (driver or passenger)
• Main bracket made from strong, lightweight 3/16″ 6061 Aluminum and is powder coated black
• Includes mounting hardware
• Fire Extinguisher NOT included
• Allows the front seat to slide ALL of the way forward IF the fire extinguisher you use is short enough to fit between the rails, such as the WHITE extinguisher shown in the pictures.  The red extinguisher shown is wider than the rails and will only allow the seat to come forward about half way, but still plenty for passengers to ride in the back seat.

Extinguisher Bracket sizes….

• PLEASE NOTE… The brackets for extinguishers such as the Kidde 5BC, 10BC and 1A10BC and other models that DO NOT HAVE A NOTCH on the neck are NO LONGER MANUFCTURED and are NOT available. You will need to get an extinguisher that HAS the notch in the neck for the bracket. (Please see the picture above, for examples.)
• 2.5 – 2.75lb extinguishers such as the Kidde PRO2.5TCM, 21006401, PROPLUS2.5, FA5G, H5G, M5G, FC5, F55, M5GM and FX5 II (These models DO have a notch on the neck, SEE LAST PICTURE above)
• 4 – 5lb extinguishers such as the Kidde PRO340 and PRO210 and many other models

WARNING! After the extinguisher is installed MAKE SURE to grab the seat adjustment rail by the CORNER when adjusting the seat, NOT the front of the rail so you don’t pinch your fingers!