FC5-Forward Controls Kawasaki Vulcan 1500 FI or 1600

FC5-Forward Controls Kawasaki Vulcan 1500 FI or 1600
Click To Enlarge

Please Note: We have discontinued the Scalloped style Brake and Shifter Pedals shown in some of the pictures. The SMOOTH style shown in the "Pedals..." picture is what will be included.

A billet aluminum forward control kit for Kawasaki Vulcan Classic, Mean Streak, Nomad, Drifter 1500 or 1600 & Suzuki Marauder 1600. It moves your controls forward 7".

These will NOT work on the earlier models called the Vulcan 1500a or VN88 or Vulcan 88.

If you do not have a fuel injected model, you WILL HAVE to BUY a 10" LONGER BRAKE HOSE!!!

If you don't know if you have Fuel Injection or carbs, look at where the master cylinder is on the foot peg mount. You can see it in the picture below. If it is lower and more horizontal, it is not fuel injected. Another way to tell is, the length of your rear brake reservoir hose should only be about 2-3" as shown in the picture below.

Can be purchased WITH or WITHOUT foot pegs.

1/2" foot peg mounting holes allow you to choose the style foot peg you want from makers such as Kuryakyn, Big Bike Parts, etc. (Stock pegs will NOT work!)

They mount on existing bolt locations on your frame so there's no need to drill any holes. 

This is a 1 hour, bolt on project. 

They do NOT require replacement or extension of the brake hose so no pesky brake bleeding.

Installation does NOT require you to destroy any stock parts so installation is completely reversible.

It does not require you to destroy any stock parts and is completely reversible.

Dealer inquiries welcome for any quantity.  Contact sales@refinedcycle.com

Installation Instructions for FC5 Forward Controls

Forward controls will NOT work with most crash bars/case guards.  If you have these types of guards they will probably have to be removed to install forward controls.

  * Marked fields are required.
Price $438.99

Best Values

Related Items