Extends your foot controls forward about 9" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Magna ALL Models, ALL years Prior to 94.

Allows you to mount a single RotoPax can onto the right side of your rear door.

Allows you to mount TWO, 2 Gallon RotoPax Cans onto the back of your rear door.

Mount Dual 2 or 3 Gallon RotoPax Cans AND Farm-All or Hi-Lift type jack on your stock bumper using existing holes!

Mount a Jerry style gas/fuel/water can AND Hi-Lift type jack on your stock bumper using existing holes!

Provides an alternate License Plate mounting location when removing the stock plastic rear fender mount to clean up the look of your rear end.

Allows you to mount Molle pouches and bags to the ceiling of your FJ Cruiser cargo area

Extends your foot controls forward about 7" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Kawasaki Vulcan Classic, Mean Streak, Nomad 1500 or 1600 & Suzuki Marauder 1600.

Allows you to hang Ropes, Straps, etc. on the D Pillar seat belt bolt location of a Land Cruiser, FJ80 FZJ80, LX450

Allows you to mount a fire extinguisher onto either side of the front seat of a Land Cruiser, FJ80 FZJ80, LX450

Mount a Flashlight on either side of the front seat of a Land Cruiser FJ80 & FZJ80 and Lexus LX450

Allows you to mount a fire extinguisher onto either side of the third row grab handle locations of a Land Cruiser, FJ80 FZJ80, LX450

Mount a Flashlight onto either side of the third row grab handle locations of a Toyota Land Cruiser 80 Series FJ80 and FZJ80 and Lexus LX450

Allows you to mount a fire extinguisher onto either side of the D Pillar third row seat belt bolt locations of a Land Cruiser, FJ80 FZJ80, LX450

Allows you to mount a Flashlight, Hatchet or Shovel onto the D Pillar seat belt bolt location of a Land Cruiser, FJ80 FZJ80, LX450

An inexpensive but effective way to protect your rear shock ends from rock and ground damage on FJ Cruiser, Tacoma, 4Runner, Land Cruiser

Allows you to mount heavier cylinders such as an air tank, CO2 tank, fire extinguisher, etc. onto the back of your rear door.

Allows you to mount a propane tank, air tank, CO2 tank, water cooler, fire extinguisher, etc. onto the back of your rear door.

Extends your foot controls forward about 8" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Shadow ACE 1100 95-00, ACE 1100 Tourer 98-01 and Aero 1100 98-02.

Allows you to mount a fire extinguisher on either side of the rear cargo area of your FJ Cruiser

Extends your foot controls forward about 5" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Yamaha Star Raider, Roadliner and Stratoliner 1900, (Midnight Star XV1900).

An inexpensive but effective way to protect your rear shock ends from rock and ground damage on FJ Cruiser, Tacoma, 4Runner, Land Cruiser

Extends your foot controls forward about 10" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Suzuki Intruder 800 750 VS800 VS750 & Boulevard S50.

Extends your foot controls forward about 6.5" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Kawasaki 85-06 VN750 Vulcan 750 Classic and Custom.

Allows you to mount a Jerry style gas or water can onto the back of your rear door without drilling any holes.

Extends your foot controls forward about 6" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Kawasaki VN900 Vulcan 900 Classic and Custom.

Extends your foot controls forward about 8" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Shadow ACE 750 VT750c 98-03.

Extends your foot controls forward 3.5" to 4.5" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda 1300 Sabre, Stateline, Interstate and Fury.

Extends your foot controls forward about 6" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda VTX 1300, all years, all submodels.

Extends your foot controls forward about 7" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Suzuki Intruder 1400 & Boulevard S83.

Extends your foot controls forward about 8" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Shadow ACE 1100 95-00, ACE 1100 Tourer 98-01 and Aero 1100 98-02 with AFTERMARKET exhaust.

Extends your foot controls forward about 6" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Suzuki Marauder 800 VZ800.

Extends your foot controls forward about 6.5" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Suzuki Intruder Volusia 800 Boulevard M50 C50 Intruder M800 C800.

Extends your foot controls forward about 11" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Yamaha V-max 85-07.

Extends your foot controls forward about 12" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Magna ALL Models, ALL years Prior to 94.

Extends your foot controls forward about 14" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Yamaha V-max 85-07.

Extends your foot controls forward about 7" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Shadow 750 Aero, Spirit C2 and Phantom.

Extends your foot controls forward about 11" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Triumph Rocket III Roadster, Standard, Classic & Rocket X

Extends your foot controls forward about 6" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Kawasaki Vulcan 800, VN800B Classic or VN800A Custom.

Luggage Rack for Corbin brand back rests or any other brand that uses the 5/8" square post or 1 1/4" or 1 1/2" wide flat post.

Skull Luggage Rack for Corbin brand back rests or any other brand that uses the 5/8" square post or 1 1/4" or 1 1/2" wide flat post.

Shield Luggage Rack for Corbin brand back rests or any other brand that uses the 5/8" square post or 1 1/4" or 1 1/2" wide flat post.

Extends your foot controls forward about 10" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits all third generation Honda Magnas (1994-2003). 

Extends your foot controls forward about 6" to relieve stress on your knees, legs and butt, for a more comfortable ride!

Fits Honda Shadow Spirit VT1100C 1997-2008 and Sabre VT1100C2 2000-2008.

FB1b-Mini Driver's Floorboards for Universal 1/2" bolt mount

Billet aluminum FB1-Mini Driver's Floorboards for Suzuki Boulevard M109R, M50, VL800 Volusia 800 and Yamaha Vmax

Billet aluminum Mini Driver's Floorboards for Suzuki Boulevard M109R and M50, VL800 Volusia 800, Yamaha Vmax 1200, Vstar 650, V-Star 1100.

4.5" x 6.75" Chrome Aluminum Headlight/Spotlight Tri-bar with Visor

PDL3-Brake and Shifter Pedal Kit for FC1 Forward Controls

A billet aluminum pedal upgrade from stock pedals for Refined Cycle FC1 forward control kits.

PDL4-Brake and Shifter Pedal Kit for FC7 Forward Controls

A billet aluminum pedal upgrade from stock pedals for Refined Cycle FC7 forward control kits.

PDL6-Brake and Shifter Pedal Kit for FC10 Forward Controls

A billet aluminum pedal upgrade from stock pedals for Refined Cycle FC10 forward control kits.

FC9 to FC18 Conversion Kit for Yamaha V-max

Extends risers to provide extra rise and pullback from stock handlebar position for a more comfortable ride.  Available in Polished or Midnight Black.

Extends risers to provide extra rise and pullback from stock handlebar position for a more comfortable ride.  Available in Polished or Midnight Black.

Passenger Peg Extensions for Honda All VTX 1300 & 1800, All Magna, All Shadow and Suzuki Volusia 800.

SP1HT-Scalloped Heel Toe Shifter Pedal

Extends risers to provide extra rise and pullback from stock handlebar position for a more comfortable ride.  Available in Polished or Midnight Black.

Saddle Brown or Black Leather Solo Seat for custom use / bobber.

Allows you to mount many different light configurations including headlights, spotlights and turn signals on metric bikes.

Allows you to mount many different light configurations including headlights, spotlights and turn signals on metric bikes.

Extends the brake pedal on Can-Am Spyder to a more natural, comfortable position to provide quicker and easier braking response.

This is a billet aluminum mount adapter that will allow you to mount TWO, 4.5" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on metric or standard bikes. Headlights sold separately.

This is a billet aluminum mount adapter that will allow you to mount TWO, 4.5" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on metric or standard bikes. Headlights sold separately.

This is a billet aluminum mount adapter that will allow you to mount TWO, 5.75" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on metric or standard bikes. Headlights sold separately.

PDL2-Shifter Pedal Kit for FC2 Forward Controls

PDL5-Bigfoot Shifter Pedal Kit for FC10 Forward Controls

Extends the brake pedal on Can-Am Spyder to a more natural, comfortable position to provide quicker and easier braking response.

4.5" Chrome Steel Spotlight, H3 55 watt bulb.

Extends the brake pedal on Can-Am Spyder to a more natural, comfortable position to provide quicker and easier braking response.

Stems for our Luggage Racks

This is a billet aluminum mount adapter that will allow you to mount TWO, 5.75" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on any year Kawasaki Vulcan 2000. Headlights sold separately.

Allows you to mount a Harley or other custom 7/16" or 3/8" stud mount Headlight to a metric triple tree using stock mounting holes. Bolts slide into a slot in the bottom from 3" - 5.9" centers AND hides them from view from the top!

Billet aluminum Highway Peg Mounts for Yamaha V-max 85-07. They move your feet forward 14".

Billet aluminum Highway Peg Mounts for Yamaha V-max 85-07. They move your feet forward 14".

Model A style Tail Brake Light with clear lens on bottom for license plate

Model A style "STOP" Tail Brake Light with clear lens on bottom for license plate.

Moves your mirrors out 2.5" wider and 1.5" higher for increased visibility. Sold as a set.

Passenger Peg Extensions for Honda All VTX 1300 & 1800, All Magna, All Shadow and Suzuki Volusia 800.

PE7-Passenger Peg Extensions for Triumph Rocket III

Passenger Peg Extensions for Kawasaki Vulcan 1500/1600 Classic, Drifter & Mean Streak / Suzuki Marauder 1600

This is a billet aluminum mount adapter that will allow you to mount TWO, 4.5" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on metric or standard bikes. Headlights sold separately.

Passenger Peg Extensions for Kawasaki Vulcan 1500/1600 Classic, Drifter & Mean Streak / Suzuki Marauder 1600

Battery Cover for under seat area on Honda Magnas (1994-2003) when installing a spring or solo seat where battery would be exposed.

Available in unfinished aluminum or powder coated.

Solo Seat Mount for Kawasaki Vulcan 800 VN800 95-06 when installing a solo spring seat.

Available in unfinished aluminum or powder coated.

This is a billet aluminum mount adapter that will allow you to mount TWO, 4.5" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on Kawasaki Vulcan 900 and other metric bikes bikes. Headlights sold separately.

Allows you to mount a flashlight onto either side of the front seat of a Toyota FJ Cruiser, 4Runner or Tacoma

Allows you to mount a 7/16" or 3/8" bottom mount custom, Harley or chopper headlight (not included) on most metric bikes that came stock with a side mount headlight.

Allows you to mount a 7/16" or 3/8" bottom mount custom, Harley or chopper headlight (not included) on Kawasaki Vulcan 900 or any other metric bike that has mount holes from 3.89" to 4.48" wide, center to center.

HPM3-Extended Peg Mount for Rivco Spyder Highway Pegs Kit

Moves the position of Rivco's Highway peg kit more forward to a much more comfortable postion for riders over 5'-10" tall.

Replaces your stock lower fender with a slick, low profile License plate mount on Kawasaki Mean Streak 1500 and 1600.

LPM10-License Plate Mount / Fender Elimination Yamaha V Star 950 replaces your stock plastic lower fender and plate mount with a slick, low profile plate mount that cleans up the look of your rear end.

Replaces your stock lower fender with a slick, low profile License plate mount on Suzuki Marauder 800 and 1600

Universal Shock mounted Tail light/License Plate Mount

Universal Hard Tail Strut mounted License Plate Mount

Replaces your stock taillight and License plate bracket with a slick, low profile License plate mount and cateye taillight on 85-07 Yamaha Vmax 1200

Replaces your stock license plate mount with a slick, low profile License plate mount on Honda Shadow Spirit 1100 VT1100C

LPM7-Shock mounted License Plate Mount for ALL years of Kawasaki Vulcan 1500 and 1600, Classic and Mean Streak

LPM8-Strut mounted "Model A" Taillight & License Plate Mount 

Replaces your stock lower fender with a slick, low profile License plate mount on Kawasaki Vulcan 900 VN900.

PE4-Passenger Foot Peg Extensions for Kawasaki Vulcan 900 VN900

PE8-Passenger Foot Peg Extensions for Yamaha V Star 950 XVS95

Allows you to mount a fire extinguisher onto either side of the front seat of a Toyota FJ Cruiser, 4Runner or Tacoma

Allows you to mount a utility bag in the rear cargo area of your FJ Cruiser

Allows you to mount turn signals to our dual & triple light mounts.  Also used to mount spot lights on Raodliner / Stratoliner or custom applications.

Allows you to Mount a Ford Model A replica Taillight to the fender for a Bobber, chopper or custom application.

Available in unfinished aluminum or powder coated.

Allows you to Mount a Ford Model A replica Taillight to the frame for a Bobber, chopper or custom application.

Available in unfinished aluminum or powder coated.

Cateye Tail Brake Light with clear lens on bottom for license plate.

Battery Cover for under seat area on Honda CB750 (1980-1982) when installing a spring or solo seat where battery would be exposed.

Available in unfinished aluminum or powder coated.

1.5" x 3" Chrome Bullet Signal / Marker Lights

This is a polished billet aluminum set of Foot Peg Extensions. They extend your foot pegs out 1.5".  Fits any 1/2" stud mount foot pegs.

Allows you to mount a 7/16" or 3/8" bottom mount custom, Harley or chopper headlight (not included) on Kawasaki Vulcan 900 or any other metric bike that has mount holes from 3.89" to 4.48" wide, center to center.

L.E.D. license plate bolt accent lights.  Holds on your plate and lights it up too! 3/16" shaft.  White LEDs.

High Intensity 55/100 Watt H4 12 volt Halogen Bulb replaces your 55/60 watt bulb for a much brighter high beam.

Saddle Brown or Black Leather Solo Seat for custom use / bobber.

Toe Pegs and Foot Pegs for Refined Cycle Forward Controls, Highway Pegs or any other custom application

There are many circumstances where you may only need 1 or a few parts from a kit.  This is the place to find them.